Brakes/Levers/Pads

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs (140mm, 160mm, 180mm, 200mm) - Compatible with both road and mountain bike brakes

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

- Aluminum pad holder with R55C4 pads

- Pair of L-Type brake pads with fins, for one caliper - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents - Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions - Longer lasting than K-Type pads - Interchangeable with K-type finless pads - Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400 - NOT compatible with XTR BR-M9100

- XT-grade 6-bolt rotor - Stainless steel braking surface for long lasting durability - Cutouts help with mud clearing and cooling - Large forged alloy spider supports rotor surface, increasing rigidity and heat dissipation while reducing weight - Comes complete with mounting hardware

Serfas' BPS-100 Shimano Compatible Pads are functional and stylish, too. The triple compound pad cleans as it eliminates squeaks. Plus, the powder-coated finish adds a polished look. All hardware is included for easy installation.

- Available in both short- and long-pull versions - Forged AL6061 alloy construction - 3-finger lever design with laser etched grip pattern - Return spring with reach and cable adjustment - 22.2mm (7/8") knee-friendly clamp - 195g pair

These adapter brackets are designed to work with the Post Mount style brake mounts.

We spend a lot of time obsessing over brake lever feel, and SwingLink technology brings our best R&D to life. The G2 RS offers riders the joys of SwingLink—getting brake pads to the rotor fast, then moderating pressure with smooth modulation. It's one small movement for your finger, one monumental upgrade to your braking. Features - Power organic pads give riders both feel and bite - Bleeding Edge for simple fluid installation and maintenance - Tool-free reach adjust for quick personalization

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

XTR RT-MT900 rotors offer stable and versatile braking performance in the most demanding MTB conditions. - Center Lock design (alloy lockring included) - Incorporates Ice Technologies Freeza construction for superior heat dissipation - Compatible with both metal and resin brake pads

Compatible with caliper and cantilever brakes - Forged aluminum lever and body - Ergonomic 2-finger lever design - Return spring with reach and cable tension adjust - Hinged clamp allows installation without removing grips/tape - Fits 1.5-1.6mm brake cable type - 90g pair

- High performance compounds recommended for all-conditions - Steel backing

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Jagwire's Mountain Sport Disc Brake Pads (Magura) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent brake performance and durability.

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

G2 RSC is the half-ton pickup truck of the mountain bike brake world—dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The new G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And of course, the signature Guide lever-feel and contact-point adjustability ensure that this brake works great for every rider. The G2 RSC presents a rider-controlled offering with an alloy blade, lever pivot bushings, and stainless steel hardware. - Useful reach and contact point adjustments for every type of rider. We design our brakes to give each individual rider distinct control of their ride. - Added stiffness in the caliper and a new pad compound that offers more bite really delivers the Mini-Code feel. - Engineered for easy installation

• Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

CenterLine X rotors are the lighter weight version of SRAM's quiet, smooth, and robust CenterLine rotors. The CenterLine X rotor features a two-piece design with an alloy center and steel brake track. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Lightweight, two-piece design - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: 6-bolt - Includes Steel rotor bolts

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

Introducing the all-new, Stealth Dominion, our award-winning Hayes Dominion A4 brakes are back – adding even more ways for you to stop! Dominion's master cylinder is factory tuned for the shortest dead stroke possible and a crisp bite point. The Dominion A4 caliper utilizes four pistons in the most structurally rigid design possible. It features a cold-forged caliper and KingPin structural pad retention bolt that increases stiffness. With a motorsports-inspired Two-Stroke dual port bleed system, industry-leading DOT 5.1 fluid and Kevlar hose, the hydraulic system is engineered for ultimate performance across all temperatures and easy maintenance. Dominion A4 features the proprietary QuickBite² system for fast and consistent burnish, coupled with our D-Series rotor to manage the heat with less braking noise. Available in SFL (Small Finger Lever)—ergonomically tailored for the smaller hand. Key Features: - Tool-Free Reach Adjustment - Flip-Flop Lever Orientation - King Pin Pad Retention - Crosshair Caliper Alignment - Two-Stroke Dual-port bleed system Specifications: - 310g (100cm hose and mount hardware) - DOT 5.1 Fluid - Tool-Free Reach Adjustment - 2-Stroke Dual Port Bleed System - Sealed Cartridge Bearings Lever Pivot - 100cm Front Hose Length - 180cm Rear Hose Length

6-Bolt mounting pattern - Wide leg design improves rotor`s lateral stiffness for a consistent and firm braking surface - Stainless steel construction - Torx bolts included