Cycling Shoes

CX/TX RACE Last – Featuring a slightly narrower toe box & tighter heel than the Competition last and less overall volume than the Sport last. Designed for very high-cadence riding & higher pressure and a slimmer fit. Outsole: Custom Fit Carbon Fiber sole. Replaceable heel strike pad. Upper: Klite Kangaroo leather & Carbitex OmniFlex Carbon Fiber Stabilizer Support panels help keep the foot stabilized, control stretch and allow for increased power transfer. Lined with Perforated Kangaroo leather for great fit & feel. Moldable carbon heel. Closure: Dual Side mounted Push/Pull IP1-S BOA lacing system

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

Experience ultimate power transmission with the XC9 S-PHYRE mountain shoes. Synthetic Leather - Lighter, stronger and more durable than natural leathers Reinforced Spike Mount - Reinforced spike mount for extreme conditions External Heel Cup - External curved heel cup suppresses foot twist and roll Carbon Sole/Mid Sole - Carbon fiber composite sole/mid sole Carbon Plate - Inserted in ball-grid section Harder Contact Block - Promotes stability and pedaling efficiency - Dedicated X-Country and Cyclocross no-compromise racing shoes - Low stack height sole helps stabilize foot during the downward pedaling stroke - A one-piece surround upper, narrow bottom, rounded heel, and slim toe box provide a glove-like fit - Dual independent Boa IP1 dials allow quick and precise micro-adjustment - Adjustable powerzone wire guide holds forefoot securely - Proprietary MICHELIN outsole minimizes weight and offers increased traction

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

The CX302 is the evolution in light weight climbing shoe that feels unbelievably light on the foot without sacrificing comfort, secure fit and power transfer. Utilizing Clarino microfiber, dual BOA Li2 dial and Lake's Handmade CFC 3K carbon fiber sole, you have a cycling slipper that the competition can get nowhere close to that weighs an amazing 195grams in size 44 (Not including insole). CX/TX Race Last– Featuring a slightly narrower toe box & tighter heel than the Competition last and less overall volume than the Sport last. Designed for very high-cadence riding & higher pressure and a slimmer fit. The wide version offers 15mm of additional volume at the ball of the foot over the standard width last. Lake Race 100% Carbon Fiber Sole. Available in 3-hole cleat pattern. CX302 utilizes Lake's patent double sole system. The inner sole is a semi flexible carbon fiber platform that allows the foot to have some flexibility at the ball of the foot where the foot tends to swell and typically hot spots or numbness would occur. The inner sole is suspended over the outer rigid carbon sole. This system enables us to use an extremely stiff carbon outsole without sacrificing riding comfort. Clarino Microfiber and mesh with Carbitex Medial Support panel for a secure fit. Dual side mounted Push/Pull Li2 BOA Fit system

The Politex material is constructed of several overlapping layers with different physical and mechanical properties. This compacted PVC is then coupled to two fabrics (knitted fabric and felt) that is then film dyed for long-lasting color retention. Politex offers strong resistance to rips, lacerations, stretching and fading. Politex is made in strict compliance with European regulations and is considered a "green” product. The Millennium 4 Carbon Composite Sole is injected molded carbon fiber in a matrix of nylon that creates a significantly lighter and stiffer sole that is less susceptible to changes because of aging or prolonged usage. The Soft Instep 3 Closure System is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The Soft Instep Closure System is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The Soft Instep Closure System is replaceable. Sidi's Techno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit. Sidi's famously reliable and replaceable closures are improved by an all-new proprietary Sidi Wire material that is completely non-binding for intuitive and effortless on-the-fly adjustments. Like most Sidi small parts, the Techno-3 Buckle is serviceable and replaceable. - Reinforced heel cup. - Replaceable heel pad. - Mega last, men's EE-EEE width, precise fit.

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa® S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT™ carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa® S2-SV Snap Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

Full-featured competition shoes optimized for comfort and pedaling performance. Synthetic Leather Lighter, stronger and more durable than natural leathers Carbon Sole/Mid Sole Carbon fiber composite sole/mid sole Wider Cleat Adjustment Expands range for mounting cleats Heel Stabilizer Improves heel hold - Ultra-rigid, lightweight carbon fiber composite sole - Shimano DYNALAST helps to reduce braking loss - Supple, high-density synthetic leather with perforated venting for superior fit - Dual independent Boa L6 dials allow quick, micro tension adjustments - Adjustable powerzone wire guide holds forefoot securely

Simply put, the X-Alp Elevate is a mountain bike shoe for mountain biking. It's not focused on power transfer at the expense of walkability, nor is it a skate-style shoe with cleats attached. Our premier mountain bike shoe is designed for comfort and efficiency on rides that you will describe to your friends as "epic". We updated the X-Alp Elevate with features that make it lighter, more comfortable, and even more capable of exploring the trails less traveled. All-day rides are as much about efficiency as durability, so we removed weight from the synthetic leather tongue and upper. We kept the tried and true Vibram ECOSTEP outsole with EVA cushioning, so you can walk with confidence when the trail gets a bit too techy. Last but certainly not least, we added a second dial to the BOA Fit System, so you can dial in your perfect fit. - BOA Fit System with dual L6 dials to fine-tune fit - Seamless synthetic upper for comfort and durability - Perforated tongue for improved breathability - Reinforced toe box provides impact protection - Grippy Vibram ECOSTEP rubber outsole - Midsole made with 20% renewable algae-based Bloom material - EVA heel cushioning increases comfort and walkability - 2-bolt SPD cleat compatible

The 2FO Cliplite puts precision fit at your toe tips, providing unparalleled pedal input for on-trail control. The micro-adjustable BOA® Li2 dials combined with a welded upper provide a ridiculously comfortable fit. Built on a cushioned EVA foam midsole and relaxed fit last, the 2FO Cliplite keeps you locked in and cooled down for all-day riding without sacrificing off-the-bike comfort and style. The shoe rides on our SlipNot™ FG rubber sole delivering best-in-class pedal grip and connection when hitting full send. The 2FO Cliplite is perfectly adjusted for all-out trail speed. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Welded upper protects and holds the foot to protect and ventilate while tackling gnarly terrain. - Independent BOA® Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa® guarantee. - Lollipop™ nylon shank is paired with an EVA midsole to flex where needed while remaining stiff for pedaling. - Micro-perforated synthetic provides a soft and supple feel without sacrificing protection and durability. - XPEL™ hydrophobic lining provides cushioning and doesn't retain water. - Two-bolt cleat pattern fits all major mountain pedals. - Landing Strip™ cleat pocket guides the cleat into the pedal for insanely fast engagement. - Approximate weight: 424g (1/2 pair, Size 44)

If you're ready to step up to a higher-performing option that looks good and feels great, the Torch 2.0 is the perfect upgrade for you. The Torch 2.0 is the ideal intersection of high performance and comfort, offering you a pair of shoes you can count on, whether you're joining their first group ride or clipping into the spin bike to get their sweat on. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Woven Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - BOA Li2 dial for dual direction micro-adjustments and pop release, forefoot strap for fine-tuning fit - Seamless Synthetic upper for a supple fit. All over laser perforation added breathability - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 268g (1/2 pair, Size 42)

Just because winning an XC World Cup isn't on your to-do list, doesn't mean you don't value performance and comfort. Recon 2.0 is your shoe. Inspired by S-Works Recon, with Body Geometry comfort and efficiency, Recon 2.0 puts all that performance within easy reach. Using our exclusive STRIDE toe-flex technology, the nylon outsole uses a TPU-injected forefoot for natural movement off-bike, while still providing a stiffness index of 6.0 for in-the-saddle performance. We've also lifted the heel for an even more natural feeling while walking. To create traction off the bike in wet or dry, gravel or dirt, we've covered the nylon outsole with our SlipNot compound. If the traction's needed in the wet, you can also rest easy knowing the XPEL mesh used through the Recon 2.0 won't get bogged down with water and will dry exceptionally quickly. No more wet shoes the morning after a wet ride. An L6-Snap Boa and a Velcro forefoot closure ensure micro-adjustable comfort with a secure fit designed for all-day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 357g (1/2 pair, Size 42)

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

Built for high-alpine terrain, the Rime 2.0 Hydroguard brings rugged capability to ensure you can conquer any mountain trail in any conditions. The internal Hydroguard membrane helps keep your feet dry through stream crossings, puddles, and splashes and prevents the shoe from becoming water-logged. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Internal Hydroguard membrane keeps feet dry through puddles, splashes, and stream crossings. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

The Torch 2.0 Road shoes are all about comfort—well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. We decided to address this annoyance head on, though. To do so, we've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with our medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, we added a single lightweight Boa® IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa® IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

The Torch 2.0 Road shoes are all about comfort — well, comfort and performance that is. Due to the materials, road shoes often feel stiff and uncomfortable. Specialized decided to address this annoyance head-on, though. To do so, they've implemented a 100% mesh and TPU construction on the Torch 2.0 that allows for more wiggle room in the toe box and a less constrictive, sock-like feel. The upper is then paired with the medium-stiffness FACT carbon sole and a rubber heel and toe that provide the perfect degree of off-the-bike traction. For the closure, Specialized added a single lightweight Boa IP1 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon sole with a 7.0 Stiffness Index is engineered to be moderately stiff, yet light with a rubber heel and toe for off-the-bike traction. - Lightweight Boa IP1 dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh and TPU upper for a supple fit. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 235g (1/2 pair, Size 42)

With its seamless upper and carbon-insert sole, this road cycling shoe rivals other footwear at twice the price. We bonded mesh to the heavily perforated upper in a seamless construction to give the shoe a more comfortable fit. A single L6 BOA closure provides equal pressure across the instep. The heel features a 1cm rise to make walking easier, and the sole is set up to give you the option to use a two-bolt or a three-bolt cleat. - Bonded Seamless Upper delivers all-day riding comfort, breathability, and durability - L6 Boa system with sequence routing for micro-adjustability and secure, even closure - 1:1 Composite Power Plate with carbon fiber forefoot insert provides lightweight stiffness and durability (stiffness rating 8) - BioViz reflective elements for low-light visibility - EVA foam and rubber heel bumper give stability and walking comfort - 3-bolt road cleat & SPD compatible

With its seamless leather upper and carbon-insert sole, this women's road cycling shoe rivals other footwear at twice the price. We bonded mesh to the heavily perforated upper in a seamless construction to give the shoe a more comfortable fit. A single L6 BOA closure provides equal pressure across the instep. The heel features a 1cm rise to make walking easier, and the sole is set up to give you the option to use a two-bolt or a three-bolt cleat. Features a women's specific shape and fit. - Bonded Seamless Upper delivers all-day riding comfort, breathability, and durability - L6 Boa system with sequence routing for micro-adjustability and secure, even closure - 1:1 Composite Power Plate with carbon fiber forefoot insert provides lightweight stiffness and durability (stiffness rating 8) - BioViz reflective elements for low-light visibility - EVA foam and rubber heel bumper give stability and walking comfort - 3-bolt road cleat & SPD compatible

Born from the needs of our professional downhill racers (Loïc/Finn/Miller), we designed and built the 2FO Clip 2.0 for one purpose—to win races. Premium downhill and trail shoes need to be more than just protective and stiff, though. They also have to be lighter, faster-drying, and be secure both in and out of the pedal. The 2FO Clip 2.0 checks all these boxes, while also including our Body Geometry features that keep your hips, knees, and feet aligned to give you the most out of every pedal stroke. Take these shoes for a ride and see why they’ve already won four World Cups and one World Championship under Loic. - Body Geometry sole construction and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Captured foam upper protects the foot. - XPEL air mesh on tongue and upper provides protection and quickly sheds water weight. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Stiff Lollipop inner plate for high performance pedaling sits in a bed of EVA to soften landings and maintain off-bike traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Relaxed Fit for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 700g (size 42)

The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

The first flat pedal shoes designed to handle the abuse of all-mountain riding to give you the confidence, control and comfort you need for all-day riding. These extremely lightweight shoes use a premium dual compound Vibram Megagrip sole for instant pedal engagement combined with long wearing rubber at the toe and heel. Seamless bonded upper construction delivers unmatched comfort and lightweight durability for hours of riding. - Bonded Seamless Upper delivers lightweight, durable riding performance - Reinforced toe cap for added protection - Traditional lace closure for a precise fit and all day comfort - EVA midsole for excellent shock absorption for hard landings - Vibram dual density zonal outsole compounds deliver the perfect blend of exceptional grip, traction and durability - Open, chevron shaped lugs with Vibram Megagrip compound in toe and heel areas provide long lasting traction off-the-bike in all conditions - Smooth, siped rubber outsole design with Vibram IdroGrip compound in pedal zone offers instant pedal pin engagement - Weight: 340 g (size 42)

The X-Alp Summit is a great shoe for all-day mountain bike adventures. Fully redesigned from the ground-up, the X-Alp Summit shoe receives trickle-down technology from our flagship X-Elevate trail shoe, including a Nylon composite sole that balances pedaling efficiency with walkability and a Grippy Vibram ECOSTEP rubber outsole that will help you navigate the gnarliest hike-a-bike sections. An L6 BOA Fit System works alongside the Velcro toe strap to provide a comfortable, secure fit. The synthetic leather upper features a plethora of perforations to improve ventilation and allow your feet to dry out after creek crossings. Mountain biking can be rough work, so we reinforced the toe box to ward off rock strikes. - BOA Fit System with L6 dial for a secure, comfortable fit - Seamless, perforated synthetic upper for comfort and breathability - Reinforced toe box provides impact protection - Grippy Vibram ECOSTEP rubber outsole EVA heel cushioning increases comfort and walkability - 2-bolt SPD cleat compatible

The first flat pedal shoe designed to handle the abuse of all-mountain riding to give you the confidence, control and comfort you need for all-day riding. This extremely lightweight shoe uses a premium dual compound Vibram Megagrip sole for instant pedal engagement combined with long wearing rubber at the toe and heel. Seamless bonded upper construction delivers unmatched comfort and lightweight durability for hours of riding. - Bonded Seamless Upper delivers lightweight, durable riding performance - Reinforced toe cap for added protection - Traditional lace closure for a precise fit and all day comfort - EVA midsole for excellent shock absorption for hard landings - Vibram dual density zonal outsole compounds deliver the perfect blend of exceptional grip, traction and durability - Open, chevron shaped lugs with Vibram Megagrip compound in toe and heel areas provide long lasting traction off-the-bike in all conditions - Smooth, siped rubber outsole design with Vibram IdroGrip compound in pedal zone offers instant pedal pin engagement - Weight: 295g (size 39)

A great shoe for gravel riding needs attributes of both road and mountain shoes. Equally at home on gravel, XC trails or all-day adventures. We borrowed technology from our X-Project so that neither walkability nor pedaling stiffness suffer. Then cut the upper from a durable 1-piece synthetic leather and added perforations to let feet breathe. A single L6 BOA closure provides equal pressure across the instep. Extra toe protection helps with errant stones and any extended or uphill hikes. A short EVA insert at the heel provides noticeable vibration damping to reduce fatigue on longer rides over rough roads. - Seamless perforated synthetic upper for improved breathability and comfort - L6 Boa system with sequence routing for micro-adjustability and secure, even closure - 1:1 Next Step Nylon composite sole does what no other can: deliver uncompromising pedaling performance and confident off-the-bike hike-ability - Reinforced toe bumper for added durability and protection - TPU lugs deliver off the bike confidence - 2-bolt SPD cleat compatible

A NO-NONSENSE CLIP SHOE FOR PARK, SHUTTLE AND TRAIL SESSIONS Evolution may happen by natural selection, but sometimes a little nudging helps too. Designed for riders desiring a clip offering with the fit and aesthetic of our popular Hellion flat, we took our lightweight microfiber upper, added a hook and loop strap for extra security and created a new clip-compatible hexagon outsole. The result is our lightest clip, all-mountain shoe. The 42mm wide cleat box with index marking offers a generous amount of adjustability for a precise cleat position, whether you prefer hot laps in the bike park or technical singletrack. Features: - CLIP GRIP rubber outsole - 42mm wide cleat box with index markings for cleat placement and extended cleat pocket runway - RC PowerDrive nylon shank drives power and maintains lateral stiffness - EVA midsole provides support and shock absorption - Dual-density EVA insole provides additional support and cushion - Microfiber synthetic upper is abrasion and weather resistant - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Hook and loop strap for additional foot retention - Elastic lace tuck to keep laces secure - Abrasion-resistant TPU toe and heel with internal toe protection

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

A technical shoe designed to deliver superior comfort and durability for aggressive all-mountain riding. The seamless upper provides hours of comfort in or out of the saddle. A new sole featuring a nylon composite shank and Vibram rubber provides maximum grip, longevity, and pedaling stiffness. - Advanced 3-Layer Seamless Composite Upper delivers all-day riding comfort and durability - 1:1 Anatomic Buckle Closure System reduces hot spots and removes pressure from your instep - Low-cut construction for a light, fast fit and feel - Nylon composite shank for efficient power transfer and off-the-bike versatility - Lightweight EVA midsole for off-the-bike cushioning and all-day comfort - Aggressive lugged Vibram Megagrip compound outsole for superior traction and durability - SPD Compatible - Weight: 398g (size 40)

Mountain: Biker, Climber, Guide, Explorer. For those who ride and hike, hike and ride, or simply find themselves going off trail, we created the Rime Flat. An approach shoe for the dedicated trail rider designed to have just as much performance when hiking as it does when riding. The proprietary SlipNot SuperTacky rubber sole was developed to strike a perfect balance of pedal grip and trail kick. To aid in climbing steep and loose trails, we've built in a flexible toe section that makes it easier to kick into the terrain, giving you a leg up when you hike up. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency; optimize hip, knee, and foot alignment; and reduce injury risks. - Welded mesh and TPU upper eliminates seams and is engineered for durability. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 386.5 grams