Other

The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.

Nylon cable ties - 8 inches long

This adaptor makes 135mm rear MTB axle compatible with any stationary fluid/wind trainer. - Stainless steel construction for durability. - Fits 135 x 12mm rear axle. - Compatible with 5mm Allen for easy installation.

Specialized's C50 carbon extensions allow for a low aggressive aero position or a high-leverage position for climbing. Their 22.2mm outer diameter is compatible with many standard aftermarket aerobar clamps, and at 400mm long, they can be cut to fit your specific reach.

Keep your ride upright and looking fly with Specialized's Center mount kickstand! - Made of durable aluminum.

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm

Turbo Chainstay-Mounted Kickstand - 323mm.

For riders looking for comprehensive coverage to protect high risk areas of a dual-suspension eMTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed around e-mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension eMTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high risk areas of a Hardtail MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10 year warranty. - Matte clear film - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around hardtail mountain bike geometry - The Hardtail MTB Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

- Protects high risk areas of the fork from rock chips, wear & scratches - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - Fork coverage ~60%. Includes crowns, lowers, and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

For riders looking for comprehensive coverage to protect high risk areas of a Road or Gravel frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails and roads. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around road and gravel bike geometry - The Covered Road & Gravel Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker-sheet

For the rider who wants to protect the high-risk downtube region of their frame. Perfect for preventing acute damage and wear and tear on the downtube. Downtube protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the downtube of the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails and shuttling. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10 year warranty. - Matte clear film - Fits all makes, models, and sizes - Designed around mountain bike geometry - The Essential Downtube Kit includes protection for downtube and extra pieces to provide approximately 10% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For the price point rider who wants a core level of protection for key areas of their frame. Perfect for preventing damage from cable rub and acute wear and tear. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed around mountain bike geometry - The Essential MTB Frame Kit includes protection for toptube, downtube, 4 stays, and extra pieces to provide approximately 30% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Park's Shop Stool boasts a super-comfy padded seat, sturdy chrome-plated-steel legs and Park's colorful logo on top. The seat spins 360 degrees and is positioned at a height of 32 inches, which is perfect for wheel truing and all other work at a bench or counter.

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Direct mount version - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty

Customize the decal colour of your OneUp Carbon Handlebar with this die-cut vinyl decal kit. Also includes extra decals for your bike, helmet, water bottle, truck, or dog*. Choose from 12 colours. Red, Green, Blue, Orange, Purple, White Gloss Black (looks awesome on the carbon bar) Turquoise (Yeti Turq) Oil Slick (Shiny Holographic) Silver (Matches Pike and Lyric's Polished Chrome) Gold Matte Metallic (matches Kashima and Gold Cassettes) Bronze Matte Metallic (matches Copper cassettes) *OneUp does not recommend applying decals to animals. HOW TO APPLY Step 1: Cut out the decal you want to apply from the sheet Step 2: Remove the White paper backing Step 3: Apply decal Step 4: Remove the clear transfer tape, leaving only your coloured decals

- A Threadless no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube - The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool. - Easy to install in less than 10 minutes. - Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule. - Chain pliers are not compatible with the threadless carrier set up. - The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)

Frame Protection Protect your bike against body snatchers, the blob, and those troublesome triffids. Specifically designed to protect your bike's exposed areas against knocks and wear, commonly picked up on the trails and in transit, the seventeen patches can be used independently or in harmony, letting you decide what areas to protect.

No graphics. No logos. Just a clean layer of protection, available in matte or gloss. Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

RIDE FREE Ditch the heavy pack and saggy saddlebag with the all-new Clutch Crank Storage. Lightweight and right there when you need it with six allens, a chain tool, and a spoke wrench, the Clutch Crank Storage can solve just about any trail-side mechanical. FEATURES: - The smallest multi-function crank-stored tool on the market - Magnetic locking system ensures quiet, stable storage - Quickly and easily mounts in hollow crank spindle - Compatible with hollow-spindle SRAM, Shimano, and Praxis cranks - Includes 2.5 to 6mm allens, a T25 Torx, a valve core remover, spare chain links, and a spoke wrench SPECIFICATIONS: - Tools: 2.5, 3, 4, 5, 6mm Hex, T25, Chain breaker, Spare chain links storage, Spoke wrench - System: Compatible with Sram & Shimano & Praxis Cranks - Sizes: 100x 32 x 19mm (TBC) - Weight: 84g - Material: High-density plastic

INVISIBLE INFLATION Lightweight, firmly attached and quiet, but easily accessible when you need it, the Giant Clutch Fork Storage kit fits a CO2 cartridge and inflator right into your fork’s steerer tube and helps you ride pack-free. FEATURES: - Invisible until you need it - Multiple taper mounting design - Rubber mallet installation, no need for any glue or adhesive - Carries a 16g or 25g CO2 cartridge and inflator (cartridges sold separately) SPECIFICATIONS: - Tools: 16g or 25g CO2 Cartridge, CO2 inflator Sizes: 160 x 40 x 21mm - System: Compatible with RockShox & Fox & DVO Forks - Weight: 118g (with a 25g CO2 cartridge) - Material: Aluminum

- Robust universal stand - User friendly - Alloy construction - Adjustable length via a twist knob

Features - E-Bike specific kickstand - Designed to handle the additional weight of battery assisted Giant bicycles - Adjustable leg assures the perfect fit for all frame sizes Fits: - Road-E - Quick-E - Dirt-E - ToughRoad GX-E - Explore-E - Vall-E - Amiti-E

Giant's Mobility Kickstand attaches to your bike's frame at the rear dropout for convenience and easy access.