Other

- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 88, 30 and 60 front hubs Zipp 188v8 rear hubs Zipp ALL free hub driver bodies - These 61803 bearings are not interchangable with the 77/177 hub 61803 bearings

Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm

- Elbow pads embossed with Zipp brand logo - Includes 2 foam pads, 2 velcro, and 2 base plates - This may be used with the older Vuka Clip - Bolts are NOT included and the bolt kit varies with clip type

The Vuka Clip On is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position. Offered in affordable aluminum in both above and below-bar configurations. Additional risers, armrests and aero accessories available for fine tuning and maintenance.

Zipp Speed Weaponry Aero Bar Parts - Armrest pads are not included

Zipp's Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip’s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. - Sold in pairs - Risers cannot be stacked - Includes hardware

Carbon Vuka Extensions give you all the options needed to optimize your aero position. Available in four styles. Straight gets you low for that aggressive aero position. Ski-Tip places you in a position for speed as well as long-haul comfort. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. Race Vuka Shift, features the Race bend, moving the shifter closer to the rider’s hand by almost an inch by mounting the shifter directly onto the extension. This allows the rider to shift easily from their aerodynamic tuck. The Race Vuka Shift is compatible with SRAM 900 TT, 500 TT, R2C Aero Shifter and Zipp R2C shifters only. - Compatible with Vuka Clip and all 22.2 systems - Internal cable routing

The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

Offered in multiple sizes and applications, Wolf Tooth Components' ReMount places your dropper lever in a more ergonomic position tha allows you to keep a better grip on the bar while actuating your dropper post. - Available in standard 22.2mm diameter for MTB bars, as well as Shimano I-Spec A&B, I-Spec II, and SRAM MatchMaker options - Designed to work with cable-actuated dropper levers with pivots parallel to the handlebar's length - Allows a dropper post remote to be below the bar and on its side for better ergonomics

Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6 mm long so they work perfectly with any bolt-on single chainring that does not have threaded standoffs. - Design and manufactured in Minneapolis, MN USA - 7-8 NM tightening torque with light grease on threads only - Material - 7075-T6 aluminum - Weight - 5 bolts = 10 grams

This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

- 1-1/8-inch Whiskey Parts and Co. Compression plug

The Whisky compression plug for carbon forks is reliable and easy to use. The simple design offers excellent support and function, works great with Whisky carbon forks, and may fit other manufacturer's forks as well.

105 piece assortment of 1-1/8-inch aluminum headset spacers. Kit includes: - 1.5mm (Silver) qty. 15 - 2.5mm (Silver) qty. 15 - 5mm (Silver) qty. 15 - 7.5mm (Silver) qty. 5 - 10mm (Silver) qty. 5 - 1.5mm (Black) qty. 15 - 2.5mm (Black) qty. 15 - 5mm (Black) qty. 15 - 7.5mm (Black) qty. 5

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black

- 4, 5, & 6mm stainless steel fastener kit - Includes socket cap screws, flat socket cap screws, flat washers, lockwashers, plain nuts, and locking nuts - 218 Pieces Kit contains: - M4 X 8 Socket Head Cap qty. 8 - M4 X 16 Socket Head Cap qty. 8 - M4 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Socket Head Cap qty. 12 - M5 X 10 Socket Head Cap qty. 12 - M5 x 8 Socket Head Cap qty. 12 - M5 X 16 Socket Head Cap qty. 8 - M5 X 16 Button Socket Head qty. 16 - M5 X 25 Socket Head Cap qty. 4 - M5 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Flat Socket Head Cap qty. 8 - M5 X 16 Flat Socket Head Cap qty. 8 - M6 X 20 Socket Head Cap qty. 2 - M6 X 35 Socket Head Cap qty. 2 - M6 X 45 Socket Head Cap qty. 2 - M4 Flat Washer qty. 8 - M5 Hex Nut qty. 20 - M5 Nylock Nut qty. 10 - M5 Flat Washer qty. 20 - M5 Lockwasher qty. 20 - M6 Hex Nut qty. 8 - M6 Nylock Hex Nut qty. 6 - M6 Flat Washer qty. 8 - M6 Lockwasher qty. 8

- Zinc plated for durability - All screws grade 12.9 - 475 Pieces Kit contains: - M5 X 10 Button Head qty. 20 - M5 X 12 Button Head qty. 20 - M5 X 16 Button Head qty. 20 - M5 X 12 Socket, Zinc qty. 35 - M5 X 16 Socket, Zinc qty. 35 - M5 x 20 Socket, Zinc qty. 15 - M5 X 25 Socket, Zinc qty. 10 - M5 X 30 Socket, Zinc qty. 10 - M5 X 12 Flat Socket Head, Spd qty. 25 - M5 X 16 Flat Socket Head, Spd qty. 25 - M5 X 8 Flat Socket, Zinc qty. 20 - M5 Nut qty. 50 - M5 Nylock Nut, Zinc qty. 40 - M5 Acorn Nut, Zinc qty. 10 - M5 Flat Washer qty. 65 - M5 Oversized Flat Washer qty. 25 - M5 Lockwasher qty. 25 - M5 Toothed, Zinc qty. 25

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

Wheels Manufacturing 1-1/8 4-Piece Headset Spacer Kit includes an assortment of black anodized aluminum headset spacers for 1-1/8" fork steerers. Includes one each: - 2.5mm - 5mm - 7.5mm - 10mm

Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains

BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems

Replacement retainer clips for BB30 bottom brackets to retain the 6806 bearings in place. - For BB30 standard frames - Sold 2 per bag

Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Sold individually (two needed per frame) - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm – 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 30mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 36g

Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 10mm spacer

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 15mm spacer

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers